Cerustop wax guard (hearing aid filter)

Features

• Compatible for most Phonak, Unitron, Resound and Widex hearing aids
• 8 pieces of filter per packet
• Each filter has 2 ends; a removal end and a wax guard
• Prevent earwax and moisture from block the hearing aids
• You should change the wax guard if your hearing aids are weak/silent or if wax is visible in the wax guard
• IIC (Invisible-In-Canal), CIC (Completely-In-Canal), ITC (In-The-Canal), ITE (In-The-Ear), mini RITE (Receiver-In-The-Ear), and RIC (Receiver-In-Canal) hearing aids are most vulnerable to hearing aids malfunctioning due to ear wax

Step-by-step guide

1. Remove the dome at the end of the hearing aid by gently pulling from underneath to expose the existing (currently used) wax guard
2. Use the removal end of the filter, insert it into the old wax guard, turn and pull it (current/used wax guard) out
3. To insert the new wax guard, use the new wax guard end of the filter, insert it and tilt the filter to input the new wax guard
4. Place back the dome

Note: step 1 & step 4 are only applicable to mini RITE (Receiver-In-The-Ear) and RIC (Receiver-In-Canal) hearing aids